|
General Purpose Capacitors |
|
|
We are one of the leading manufacturers of General Purpose Capacitors. These capacitors are oil impregnated that makes it able to withstand higher voltages. These capacitors are used in Filtering & quenching applications in SMPS & RC Circuits, lighting applications and AC motor speed controls.
These capacitors are used in general purpose RC N/W across diodes, SCR, lighting applications and in suppression circuits.
We are looking for bulk enquiries for film foil polypropylene capacitor, polypropylene axial film capacitor, Film Foil Polyester Capacitor, Paper Polyester High Voltage Axial capacitor etc.
We offer following capacitors in this category:
|
|
|
|
Polypropylene Film CapacitorItem Code: KP11 We are instrumental in offering our clients, quality film foil polypropylene capacitor. These capacitors are ideal for light duty pulse, logic & timing circuits and lighting applications. Moreover, these capacitors are also used in high frequency circuits and electronic ballasts. Specifications: - Oil Impregnated, Low Loss
- Dielectric - Polyester
- Electrode - Aluminium Foil
- Coil: Non inductively wound
- Leads: Radial Copper Wires, Solder Plated, Directly welded
- Construction: Rectangular plastic box, Resin sealed
- Markings: El-Ci-Ar logo, Capacitance, Voltage, Type
- Tolerance: 20%, 10%, 5%
- Dissipation Factor <= 0.001 at 1KHz at 25 C (Typical Value 0.004)
- Test Voltage: 2.5 x Vr for 2 sec
- Max Pulse Rise: 1000 V/usec
- Temperature Range -25 C to + 85 C
- Insulation Resistance >= 50 G for C <=0.33uF at 25C
Applications: - Suited for light duty pulse, Logic & Timing Circuits
- Lighting Applications
- High Frequency Circuits
- Electronic Ballasts
|
|
|
|
|
|
|
|
|
Polypropylene Axial Film CapacitorItem Code: KP14 We offer polypropylene axial film capacitor - KP14 Features - Oil Impregnated for Good Corona Resistance
- Dielectric - Polypropylene
- Electrode - Aluminium Foil
- Coil - Non inductively wound, Extended Foil construction
- Leads - Tinned Copper Wires
- Construction - Preformed plastic case, Resin sealed
- Markings - El-Ci-Ar logo, Capacitance, Voltage, Type
- Tolerance - 20%, 10%, 5%
- Dissipation Factor <= 0.01 at 1KHz at 25C (Typical Value 0.005)
- Test Voltage: 2.5 x Vr for 2 sec
- Max Pulse Rise - 1000V/usec
- Temperature Range -25C to +85C
- Insulation Resistance >= 25 G Ohms
Applications - High Frequency Circuits
- High Dv/dt applications like snubber across MOSFETS in SMPS & UPS
- Resonant capacitor in Electronic (Lighting) Ballasts
|
|
|
|
|
|
|
|
Polyester Film Capacitor AxialItem Code: KT12 We are instrumental in offering our clients, Polyster Film Capacitor Axial - KT12. These capacitors are used in general purpose RC N/W across diodes, SCR, lighting applications and in suppression circuits. Moreover, these are oil impregnated that offers the capacitors with ability to withstanding higher voltages. Specifications: - Dielectric - Polyester
- Electrode - Aluminium Foil
- Coil: Non inductively wound
- Leads: Axial copper wires, solder plated pressure contacts
- Construction: Moulded plastic tube + blue PVC sleeve
- Markings: El-Ci-Ar logo, Capacitance, Voltage, Type
- Tolerance: 20%, 10%, 5%
- Dissipation Factor <= 0.007 at 1KHz at 25 C (Typical Value 0.004)
- Test Voltage: 2.5 x Vr for 2 sec
- Max Pulse Rise: 500 V/usec
- Temperature Range -25C to +85C
- Insulation Resistance >= 30 G for C <= 0.33uF At 25C >= 10000 sec for C>=0.33uF
Applications - General Purpose RC N/W across diodes, SCR
- Lighting Applications
- Suppression Circuits
|
|
|
|
|
|
|
|
|
|
Polyester Film Axial CapacitorItem Code: Axial-KT22 We are offering our clients, quality Polyester Capacitor. These capacitors are used in Filtering & quenching applications in SMPS & RC Circuits, lighting applications and AC motor speed controls. Moreover, the capacitors have direct welded contacts that give better ESR. - Oil Impregnated - to withstand higher voltages
- Dielectric - Polyester
- Electrode - Aluminum Foil
- Coil: Non inductively wound, Extended Foil
- Leads: Axial tinned copper wires
- Construction: Moulded plastic tube, resin filled
- Markings: El-Ci-Ar logo, Capacitance, Voltage, Type
- Tolerance: 10%, 5%
- Dissipation Factor <= 0.007 at 1KHz at 25 C (Typical Value 0.004)
- Test Voltage: 2.5 x Vr for 2 sec
- Max Pulse Rise: 500V/usec
- Temperature Range -25C to +85C
Applications - Filtering & quenching applications in SMPS & RC Circuits
- Direct Welded contacts give better ESR
- Lighting Applications
- Ac motor speed control
|
|
|
|
|
|
|
|
Polyester Film Capacitor BoxItem Code: KT11 We are offering our clients, quality Film Foil Polyester Capacitor. These are used in general purpose RC N/W across diodes, SCR, lighting applications, suppression circuits and electronic ballasts. These are oil impregnated that makes it able to withstand higher voltages. Specifications: - Oil Impregnated - to withstand higher voltages
- Dielectric - Polyester
- Electrode - Aluminium Foil
- Coil: Non inductively wound
- Leads: Radial Copper Wires, Solder Plated, Directly welded
- Construction: Rectangular plastic box, Resin sealed
- Markings: El-Ci-Ar logo, Capacitance, Voltage, Type
- Tolerance: 20%, 10%, 5%
- Dissipation Factor <= 0.007 at 1KHz at 25 C (Typical Value 0.004)
- Test Voltage: 2.5 x Vr for 2 sec
- Max Pulse Rise: 500 V/usec
- Temperature Range -25 C to +85 C
- Insulation Resistance >= 30 G for C <= 0.33 uF at 25 C
Applications: - General Purpose RC N/W across diodes, SCR
- Lighting Applications
- Suppression Circuits
- Electronic Ballasts
|
|
|
|
|
|
|
|
|
|
Paper Polyester High Voltage Axial CapacitorItem Code: FMD11 We are offering our clients, quality Paper Polyester High Voltage Axial capacitor - FMD11. These capacitors cause very loss polypropylene and are used in High Frequency Circuits. Moreover, these are used in high dv/dt applications like snubers across Mosfets in SMPS & UPS and are also applied as resonant capacitor in electronic ballasts. Specifications: - Oil Impregnated - to withstand higher voltages
- Dielectric - Polypropylene
- Electrode - Aluminium Foil
- Coil: Non inductively wound , Extended Foil
- Leads: Axial tinned copper wires
- Construction: Preformed plastic case, resin sealed, green sleeve
- Markings: El-Ci-Ar logo, Capacitance, Voltage, Type
- Tolerance: 20%, 10%, 5%
- Dissipation Factor <= 0.001 at 1KHz at 20 C (Typical Value 0.004)
- Test Voltage 2.5 x Vr for 2 sec
- Max Pulse Rise: 1000V/usec
- Temperature Range 25 C to +85 C
- Tolerance: 10%, 5%
Applications - General Purpose RC N/W across diodes, SCR
- Suited for High Voltage Applications like Induction Heating
- Suppression Circuits
|
|
|
|
|
|
| |
