Neotroniks Pvt. Ltd.Neotroniks Pvt. Ltd.
Home Profile Product Range Contact Us

Power Electronic Capacitor

Share: FacebookTwitterStumbleupon
We are committed to offer our clients a wide range of Power Electronic Capacitor. Appreciated for international quality standards, these components have a self healing capacity, which ensures longer service life even under occasional over-voltage conditions. Moreover, these are also used in induction heating applications and suppression circuits.

We are looking for bulk enquiries.


We offer following components under this category:
Power Electronic Capacitor





Polypropylene Metallized Paper Capacitor

Item Code: MKP71

We are offering our clients, quality Polyproplyne Metallized Paper Capacitor - MKP 71. These capacitors are ruggedly constructed using aluminum and have a threaded stud for mounting. Appreciated for international quality standards, these capacitors have a self healing capacity, which ensures long life even under occasional over-voltage conditions. Moreover, our Metallised capacitors are used as commutation capacitor for positive quenching of thyristors and as smoothing capacitor for D.C. circuits.

Specifications

  • Oil Impregnated and has aluminum can encased
  • Capacitors are dielectric - polypropylene
  • Provided with electrode that has double metallised paper
  • Coil: Non inductively wound, Extended Foil
  • Leads - Fast on terminals, weld jointed to coil
  • Markings: El-Ci-Ar, Capacitance, Tolerance, Voltage, Type
  • Tolerance: 10%, 5%
  • Dissipation Factor <= 0.001 at 1 KHz at 25 C (Typical Value 0.0004)
  • Test Voltage b/w terminals: 2.5 x Vr for 2 sec
  • Test Voltage b/w terminal & case: 2 x Vr for 60 sec
  • Max Pulse Rise: 500 V/usec
  • Temperature Range: -25 C to +85 C

Note - Double Faston Terminals / Stud Terminals
Also available on request.

Values - From 0.1 uF to 4.0 uF

Voltages - 640 VAC (900 VDC)
1000 VAC (2000 VDC)
1500 VAC (3000 VDC)
2000 VAC (5000 VDC)

Applications

  • Used in power electric components
  • For providing protection to semiconductor device

Applications :

  • Damping Capacitor for overvoltage protection of semiconductor device Commutation Capacitor for positive quenching of thyristors Smoothing Capacitor for D.C. Circuits.
  • The Capacitor has a self healing capacity which ensures long life even under occasional overvoltage conditions.


Other Information
  • Minimum Order Quantity:1000 Pieces

Polypropylene Metallized Paper Capacitor Click here to Zoom


Download
Click here to Zoom Paper Polypropylene Axial Capacitor




Paper Polypropylene Axial Capacitor

Item Code: FMD52

We are offering our clients, Paper Polypropylene Axial Capacitor - FMD 52. These capacitors have self healing property and are oil impregnated that offers good corona resistance. Moreover, the capacitors have coils that are non-inductively wounded and mineral oil impregnated.

Specifications:

  • Dielectric: Polypropylene + Paper
  • Electrode: Aluminum Foil
  • Leads: Brass stud
  • Construction: Aluminum can + Blue PVC Sleeve, stud insert moulded plastic end caps
  • Markings: El-Ci-Ar logo, Capacitance, Voltage, Type
  • Tolerance: 20%, 10%, 5%
  • Dissipation Factor <= 0.005 at 1KHz at 25C (Typical Value 0.001)
  • Test Voltage: 2.5 x Vr for 2 sec (Vr=2000V, 3000V) 2 x Vr for 2 sec (Vr=5000V)
  • Max Pulse Rise:  300 V/usec
  • Temperature Range: -25 C to +85 C
  • Insulation Resistance >= 25 G for C <= 0.33 uF At 20 C >= 7500 sec for C>=0.33 uF

Available Values

  • Capacitance - 0.1uF to 2uF
  • Voltage - 1200VAC (2000VDC) Rating

Applications:

For forced commutation of SCRs such as in inverters and choppers these capacitors are ruggedly designed to carry heavy currents. They employ a non-inductively wound oil impregnated paper polypropylene mixed dielectric coil with aluminium foil as electrode. Encased in aluminium can and offered in axial threaded screw terminals, these are generally popular in values from 0.1 υF to 2 µF and in voltage rating of 1200 VAC. A special construction feature provides for an explosion proof performance through the means of an open circuiting of the element when
excessive current flows through the capacitor under fault conditions.


Other Information
  • Minimum Order Quantity:1000 Pieces




Paper Axial Capacitors

Item Code: FMD51

We are one of the leading manufacturers of Polyester Paper Axial Capacitors- FMD 51. These capacitors are used in general purpose RC n/w across diodes, SCR and are suited for high voltage applications. Moreover, these are also used in induction heating applications and suppression circuits.

Specifications:

  • Capacitors are oil impregnated for good Corona resistance
  • Dielectric: Polyester and Paper
  • Electrode: Aluminum foil
  • Coil: Non-inductively wound, mineral oil impregnated
  • Leads: Brass stud
  • Construction: Aluminum can and Blue PVC Sleeve, stud insert moulded plastic end caps
  • Markings: El-Ci-Ar logo, Capacitance, Voltage, Type
  • Tolerance: 20%, 10%, 5%
  • Dissipation Factor <= 0.01 at 1KHz at 25C (Typical Value 0.005)
  • Test Voltage: 2.5 x Vr for 2 sec
  • Max Pulse Rise: 300V/usec
  • Temperature Range: 25C to +85C
  • Insulation Resistance >= 25 G for C <= 0.33uF At 20C>= 75000 sec for C>=0.33uF

Available Values

  • Capacitance: 0.1 uF to 1 uF
  • Voltage: 1000 VAC , 1200 VAC, 2000 VAC

 

Applications:

General Purpose RC N/W across diodes, SCR
M4 / M6 Suited for High Voltage Applications like Induction Heating Suppression Circuits


Other Information
  • Minimum Order Quantity:1000 Pieces

Paper Axial Capacitors Click here to Zoom


Download
Click here to Zoom RC Network Capacitors




RC Network Capacitors

Item Code: Rc11

Neotroniks RC network Metallized paper capacitors feature an integrated resistor and a high dielectric constant with excellent self-healing properties and transient handling capabilities. Neotroniks rc network metallized paper capacitors develop a high ionization level due to the impregnated dielectric material and maintain outstanding reliability in mains connected and other low frequency applications.


Neotroniks rc network network capacitors are constructed of a single layer of metalized paper dielectric encapsulated and impregnated in self-extinguishing material meeting the requirements of ul94v-o.   typical applications of the neotroniks rc network  capacitors are interference suppressors. Neotroniks rc network metallized paper capacitors are classified as x1 and x2 capacitors while maintaining the highest possible safety regarding active and passive flammability.

Other Information
  • Minimum Order Quantity:1000 Pieces




Tank Capacitor

We are committed to offer our clients, quality Tank Capacitor. These capacitors have 1000 V DC rating and value range of 5 uF. Moreover, these capacitors are widely used in induction heating and welding applications.

Features :
  • Capacitance - 5 uF
  • Dielectric - Polypropylene
  • Electrode - Aluminium Foil
  • Coil - Non inductively wound
  • Rated Voltage - 1000VDC
  • Rated Current - 125 Amps
  • Rated Frequency - 30 KHz
  • Tolerance - 10%
  • Test Voltage b/w Terminals - 200 W DC for 55 sec
  • Test Voltage b/w Terminals Case - 2.5 Vpk for 60 sec
  • Temperature Range -25C to +85C
  • Construction - Aluminium Case filled with Epoxy
  • Terminals - Soild Copper Terminals for high Currents
  • Markings - El-Ci-Ar logo, Capacitance, Voltage, Type

Applications :
  • Induction Heating Equipment
  • Welding Circuits

Other Information
  • Minimum Order Quantity:1000 Pieces

Tank Capacitor Click here to Zoom


Download
Click here to Zoom MKP71 - Self Healing Power Electronics Capacitors




MKP71 - Self Healing Power Electronics Capacitors

Features

Oil Impregnated, Aluminium Can Encased Dielectric - Polypropylene
Electrode - Double Metallised Paper
Coil - Non inductively wound, Extended Foil Leads - Fast on terminals, weld jointed to coil
(Double Faston & Stud terminals also available against request) Construction - Aluminium can with a threaded stud for mounting. Markings - El-Ci-Ar, Capacitance, Tolerance, Voltage, Type
Capacitor Tolerance - 10% (K), 5% (J)
Dissipation Factor <= 0.001 at 1KHz at 25°C (Typical Value 0.0004) Test Voltage b/w terminals 2.5 x Vr for 2 sec
Test Voltage b/w terminal & case 2 x Vr + 1000VDC for 60 sec Max Pulse Rise 500V/usec
Temperature Range from -25oC to +85oC

Applications

Damping Capacitor for overvoltage protection of semiconductor devices Commutation Capacitor for positive quenching of thyristors
Smoothing Capacitor for D.C. Circuits
The Capacitor has a self healing capacity which ensures long life even under occasional overvoltage conditions.

Other Information
  • Minimum Order Quantity:1000 Pieces





Contact Us

Neotroniks Pvt. Ltd.
Mr. Satish Shenoy (Director)
1st Floor, Mistry Mansion, No. 107, M. G Road, Fort
Mumbai - 400001, Maharashtra, India

Contact via E-mail



Home  |  Profile  |  Product Range  |  Trade Offers (20)  |  Site Map  |  Contact Us   |   Mobile Site

Member IndiaMART.com © Neotroniks Pvt. Ltd.. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited